Control Systems | stackmatch

(Pilot + Accessories + Control ) Compatibility (35.61 KB)

3X16B

3X16B control

3X16B Pic-1

3X16B Pic-2

DMNEP

DMNEP (Dual Module Non-Explostion Proof)
The DMNEP has two controls, one control for Flame Detection and the other for Pilot Ignition
Both controls can be powered by 24 vdc, 110 vdc or 220 vdc.
DMNEP modules can be sold seperate
The DMNEP is used for all DRAM pilots.

DMNEP-FD-110-REV1

DMNEP-FD-110

DMNEP-SP-2-110-REV1

DMNEP-SP-2-110

DPA

DPA (Delay Pulse Adapter)
DPA can use 110 vdc & 220 vdc
The DPA is used to control the spark that happens every 5 seconds or every ten seconds
Used for ST, LFFP, LFCFP & SPL. Enclosed Flare Pilots

DPA Pic-1

DPA Pic-2

EPAD

Information Coming Soon

EPAD Control Pic-2

EPAD CONTROL

EPM

Information Coming Soon

EPM Control Pic-1

EPM Control Pic-2

HHIFD

HHIFD (Hand Held Igntion & Flame Detection) module.

HHIFD Control Alone

HHIFD Control Plug

HHIFD Control With Wire Plug In Pic-1

HHIFD Control With Wire Plug In Pic-2

HHIFD Control With Wire Set Pic-1

HHIFD Control With Wire Set Pic-2

NEP

Information Coming Soon

NEP Control Pic-1

NEP Control Pic-2

NEP-SIS

Information Coming Soon

NEP-SIS Control Pic-1

NEP-SIS Control Pic-2

PIC

Information Coming Soon

PIC-01 Picture-1

PIC-01 Picuture-2

PS-01

PS-01 (Pilot Simulator)
The pilot simulator is used to indicate a pilot ignition event and Flame Detection to verify the control is working properly.
PS-01 can be used on an EPM, EPAD, PIC and SSC-01 controls.

PS-01

SDIC

Information Coming Soon

SDIC Control

SSC

Information Coming Soon

SSC-01-REV1 Control Pic-1

SSC-01-REV1 Control Pic-2